Custom Women's Beginner Youth Tennis Racket

The racket targets athletes aged 12‑16 who are moving from recreational play to structured coaching, emphasizing ease of swing and consistent ball contact. Frame dimensions are kept within youth‑specific limits to reduce torque on developing joints while still providing adequate rebound. Typical strung weight falls between 230 g and 260 g, allowing players to generate racquet head speed without excessive fatigue.

Key Technical Specifications

Material Options

• Graphite composite modulus 30–40 GPa, providing stiffness‑to‑weight ratio suitable for controlled power.
• Aluminum alloy 6061‑T6, offering impact resistance and lower cost for high‑volume programs.
• Basalt‑fiber reinforced polymer, delivering vibration damping above 15 % reduction compared to standard graphite.
• Hybrid lay‑up combinations (graphite outer layers, basalt core) adjustable per performance target.

Customization Parameters

• Frame geometry: beam width, cross‑section shape, and throat design adjustable to influence stiffness distribution.
• Weight distribution: addition of tungsten or titanium weights in the handle or head to shift balance point.
• String tension range: recommended 48–58 lb, with ability to set custom pre‑tension for specific playing styles.
• Grip material: synthetic leather, polyurethane, or perforated rubber, each with distinct moisture‑wicking and tactile properties.
• Cosmetic finish: matte, gloss, or UV‑curved paint systems; logo placement via screen printing, laser etching, or sublimation.

Applications

Youth tennis academies benefit from rackets that reduce swing effort while maintaining a consistent response, helping coaches teach proper stroke mechanics without equipment‑induced fatigue. School physical‑education programs require durable frames that withstand frequent rack‑and‑ball impacts; the available aluminum option meets ASTM F2413‑18 impact standards for recreational use. Club junior leagues often request personalized color schemes and logo integration to reinforce team identity, which is accommodated through the cosmetic finish options.

Quality Assurance

Each racket undergoes dimensional verification using laser scanning, ensuring head size, length, and beam width remain within ±0.5 mm of the approved drawing. Weight is measured with a precision balance calibrated to 0.1 g, and balance point is determined via a pivot‑arm method with repeatability of ±1 mm. String bed stiffness is assessed using a universal testing machine, confirming that the dynamic fall‑weight stays within the specified 180–220 Nm range for the selected string tension. Finish adhesion is evaluated with cross‑hatch tape testing per ASTM D3359, requiring a minimum rating of 4B.

Packaging & Logistics

• Individual rackets placed in low‑density polyethylene sleeves to prevent surface abrasion.
• Sleeved units packed into single‑wall corrugated cartons with 120 gsm kraft liner, dimensions optimized for 10 units per box.
• Cartons sealed with pressure‑sensitive tape and palletized using ISPM‑15 compliant heat‑treated wooden pallets.
• Export shipments include corner boards and stretch‑film wrapping to mitigate shifting during transit.

Lead Time

Standard production cycles range from 20 to 28 working days after approval of final artwork and material selection, assuming no additional tooling is required. Projects that involve new mold development or specialized lay‑up schedules may extend the timeline to 35–42 days. Expedited options are available upon request, subject to capacity validation and potential surcharges.

Frequently Asked Questions

• What information is needed to begin a quotation? Provide desired head size, target weight, balance preference, length, string pattern, grip size, material choice, and any cosmetic specifications such as color or logo artwork.
• Is there a minimum order quantity? Typical MOQ starts at 50 units for standard configurations; lower volumes can be accommodated with a setup fee.
• Are samples available before committing to a full order? Yes, prototype samples can be produced within 7–10 days, with shipping costs borne by the requester.
• How are tolerances validated for weight and balance? Each batch undergoes statistical process control; weight tolerance is held to ±5 g and balance point to ±3 mm.
• What packaging methods protect the rackets during long‑haul transport? As detailed above, sleeved units are placed in double‑wall cartons with corner reinforcement and pallet stretch‑film.

Contact for Quote

To discuss your specific requirements and receive a detailed cost estimate, please reach out using the form below.