Custom Logo Quick Drying Men And Women Sportswear Vendor
Quick-drying sportswear relies on hydrophobic fiber finishes that transport moisture away from the skin and accelerate evaporation. Typical fabric weights fall between 130 gsm and 180 gsm, offering a
Custom Logo Quick-Drying Men and Women Sportswear Vendor
Quick-drying sportswear relies on hydrophobic fiber finishes that transport moisture away from the skin and accelerate evaporation. Typical fabric weights fall between 130 gsm and 180 gsm, offering a lightweight feel while resisting abrasion from repeated wash cycles.
Material Composition and Properties
The core yarn is commonly an 88 % polyester / 12 % spandex blend; polyester provides the moisture‑wicking pathway, while spandex contributes up to 150 % elongation recovery for 4‑way stretch. A durable water‑repellent (DWR) treatment lowers surface tension, yielding a spray rating of ISO 4‑5 after twenty laundering cycles.
- Polyester microfiber – high wicking efficiency, low moisture retention.
- Nylon‑polyester blend – added abrasion resistance for high‑impact zones.
- Recycled PET filament – comparable performance with reduced carbon footprint.
Construction Details
Flatlock seams maintain a low profile height of roughly 0.3 mm, reducing skin friction and delivering tensile strength above 20 N/mm. Four‑needle overlock stitching reinforces armholes and side panels, preventing seam fatigue under cyclic loading typical of athletic motion.
Customization Options
Logos can be applied via sublimation printing, which infiltrates the fiber matrix and remains intact after fifty or more wash cycles without cracking or peeling. Heat‑transfer vinyl offers spot‑color precision with a minimum line width of 0.5 mm, while embroidery provides raised textures requiring a minimum stroke of 2 mm.
- Placement options – left chest, upper back, sleeve cuff, or hem.
- Color matching – Pantone or CMYK specifications for brand consistency.
- Size scaling – vector‑based artwork allows proportional resizing from youth to adult dimensions.
Performance Characteristics
Moisture transport measured per ISO 105‑E04 averages 0.8 mg/(cm²·s) for the polyester‑spandex blend, correlating to a drying time under thirty minutes at 20 °C and 65 % relative humidity. Ultraviolet protection factor (UPF) typically reaches 30+ when the fabric is dyed with UV‑absorbing additives.
- Breathability – air permeability > 150 mm/s (ISO 9237).
- Pilling resistance – Martindale rating ≥ 15 000 cycles (ISO 12945‑2).
- Elastic recovery – ≥ 90 % after 500 % strain (ASTM D4964).
Quality Control and Testing
Each production lot is subjected to dimensional stability testing (ISO 6330) with shrinkage limits set to ≤ 3 % after five wash cycles. Colorfastness to washing is evaluated per ISO 105‑C06, targeting a rating of four or higher. Seam strength is verified using ASTM D2261, requiring a minimum of 18 N/mm.
Applications
Team sports such as soccer, basketball, and running benefit from the garment’s low‑profile seams and rapid moisture evacuation, which help maintain core temperature during high‑intensity intervals.
Corporate wellness programs often select this sportswear for employee fitness challenges because the sublimation logo remains vivid after repeated laundering, preserving brand exposure over months of use.
Promotional events and trade shows utilize the lightweight fabric for easy packing and quick turnover, while the flatlock construction reduces irritation during extended wear periods in booth environments.
Specification Table
| Property | Typical Value | Test Method |
|---|---|---|
| Fabric Weight | 130‑180 gsm | ISO 3801 |
| Moisture Transport Rate | 0.8 mg/(cm²·s) | ISO 105‑E04 |
| Drying Time (20 °C, 65 % RH) | <30 min | ISO 105‑E04 (derived) |
| UPF Rating | 30+ | ASTM D6603 |
| Seam Strength | ≥ 18 N/mm | ASTM D2261 |
| Shrinkage (5 washes) | ≤ 3 % | ISO 6330 |
Frequently Asked Questions
Can the logo size be adjusted for different garment dimensions?
Yes, artwork is supplied as a vector file, allowing proportional scaling from youth small to adult XXL without loss of detail.
What file formats are required for sublimation printing?
Preferred formats are PDF, AI, or EPS with embedded fonts; raster images must be at least 300 dpi at final size.
Is there a minimum order quantity for custom logo runs?
Typical minimums start at fifty pieces per design, though lower volumes can be accommodated with a setup fee.
How are colors matched to corporate standards?
We provide Pantone‑to‑fabric swatch approvals before production to ensure color fidelity within ±2 ΔE.
Get a Quote
Ready to discuss your custom logo quick‑drying sportswear needs? Provide your artwork, desired sizes, and quantity to receive a detailed proposal.
