Wholesale Pickleball Net with Wheels – Technical Overview

This product combines a regulation‑size pickleball net with an integrated wheeled base, allowing the entire system to be moved and locked in place without disassembly. It is intended for facilities that require frequent court reconfiguration, such as multi‑use gymnasiums, community centers, and tournament venues.

Frame and Wheel Assembly

The support frame consists of two 2 mm thick steel tubes formed into a rectangular perimeter, powder‑coated to resist corrosion. Each corner houses a 100 mm diameter polyurethane wheel equipped with a dual‑lock mechanism that secures both rotation and lateral movement when engaged.

When the locks are released, the wheel assembly permits smooth rolling over smooth indoor surfaces with a rolling resistance coefficient of approximately 0.02, enabling a single operator to reposition the net with less than 15 N of force.

Net Material and Tension System

The net is fabricated from 2 mm high‑density polyethylene (HDPE) mesh, UV‑stabilized for outdoor exposure, with a tensile strength of roughly 30 MPa. Mesh openings are 45 mm square, conforming to official pickleball specifications.

Tension is maintained by a ratchet strap system attached to the frame’s side rails, capable of applying up to 50 kg of preload. The strap includes a quick‑release lever for rapid net removal during storage or maintenance.

Dimensional Adjustability and Customization

Overall height from ground to top of net is adjustable between 860 mm and 910 mm in 10 mm increments via telescoping uprights with detent pins. Width is fixed at 6.10 m to match standard court dimensions.

Custom options include alternative wheel diameters (75 mm or 125 mm), frame finishes (galvanized or powder‑coated in specific RAL colors), and net edge reinforcement with 3 mm polyester binding.

Manufacturing Considerations

Frames are welded using MIG processes with full‑penetration seams, followed by stress‑relief annealing to minimize distortion. Wheel mounts incorporate reinforced gussets to distribute impact loads during locking/unlocking cycles.

Each unit undergoes a functional test: rolling resistance measurement, lock engagement verification, and net tension check at 75 % of maximum strap capacity before packaging.

Typical Applications

• Facilities that host both pickleball and other court sports, requiring rapid conversion between layouts.
• Outdoor recreational complexes where nets must be moved to accommodate seasonal events or maintenance.
• Educational institutions needing portable equipment for physical education classes and intramural leagues.
• Commercial clubs that store nets off‑court to maximize floor space for other activities.

Comparison with Standard Fixed Nets

Frequently Asked Questions

Can the wheelbase be retrofitted to an existing net?

The wheelbase is designed as an integral part of the frame; retrofitting would require replacement of the uprights and mounting brackets, which is not recommended due to load path considerations.

What information is needed for a quotation?

Please provide desired quantity, any custom wheel diameter or finish preferences, net edge reinforcement requirements, and delivery destination for freight cost estimation.

How is product quality verified before shipment?

Each unit undergoes a functional test protocol that includes wheel lock torque measurement, frame weld visual inspection, and net tension verification at 75 % of strap capacity. Test records are retained for traceability.

What packaging methods protect the wheels during transit?

Units are packed in double‑wall corrugated cartons with interior foam corner guards; wheels are immobilized using molded polyethylene inserts to prevent impact damage.

Contact for Wholesale Inquiry

To request a detailed quote, discuss customization options, or arrange a sample evaluation, please reach out via the contact form.