Wholesale Monarch Official Mobile Pickleball Net Company
This product is a regulation‑size pickleball net system designed for rapid deployment in indoor and outdoor commercial facilities. The frame collapses to a compact profile for transport, while the
Wholesale Monarch Official Mobile Pickleball Net
This product is a regulation‑size pickleball net system designed for rapid deployment in indoor and outdoor commercial facilities. The frame collapses to a compact profile for transport, while the net tension mechanism maintains official height specifications during play.
Key Technical Specifications
Overall width: 6.10 m (20 ft) measured between the outer edges of the support posts. Net height at centre: 0.914 m (36 in) and at sidelines: 0.864 m (34 in), conforming to USAPA/IFP standards. Post diameter: 50 mm aluminium tubing with wall thickness 2 mm.
Net mesh: 45 mm hexagonal polypropylene, tensile strength ≥ 30 MPa, UV‑stabilised for ≥ 500 h exposure. Tension system incorporates a ratchet mechanism capable of applying up to 150 N of force per side without slippage.
Packaged dimensions (collapsed): 1.20 m × 0.25 m × 0.20 m, weight 18 kg per unit, allowing two‑person handling with a standard hand truck.
Materials and Construction
Frame components are extruded 6063‑T5 aluminium, anodized to 15 µm thickness for corrosion resistance in humid environments. Joints employ stainless‑steel pins (A2‑70) with nylon bushings to minimise wear during repeated assembly cycles.
The net is sewn with double‑stitch polyester thread (Tex 70) along all load‑bearing seams, providing a seam strength of ≥ 250 N. Edge tapes are PVC‑coated polyester, width 38 mm, offering abrasion resistance against court surfaces.
All fasteners are captive to prevent loss during disassembly; torque specifications are marked on each joint (≤ 8 Nm for aluminium‑to‑aluminium connections).
Design and Mobility Features
A quick‑release latch system allows the net to be tensioned or loosened in under 15 seconds per side, reducing setup time between matches. The latch incorporates a safety lock that prevents accidental release under load.
Wheel kits (optional) consist of two 100 mm polyurethane casters with lock‑swivel mechanism, enabling single‑operator movement across smooth surfaces while maintaining stability during play.
When collapsed, the frame nests into a rectangular tote with internal foam padding, protecting finish and preventing deformation during transit.
Performance Characteristics
Under a simulated wind load of 15 km/h, net deflection measured at centre remains below 12 mm, preserving playability. Frame buckling load tested to 3.5 kN, providing a safety factor of > 2 for typical impact forces from ball strikes.
UV exposure testing (ASTM G154) shows < 5 % loss in tensile strength after 1000 h, confirming suitability for year‑round outdoor installation.
Noise emission during tension adjustment is ≤ 45 dB(A), suitable for indoor facilities with acoustic constraints.
Applications in Commercial Settings
Facilities such as community recreation centres, school sports complexes, and private clubs benefit from the net’s rapid deployment, allowing multipurpose courts to switch between pickleball, badminton, and short‑tennis configurations without permanent fixtures.
The lightweight yet rigid frame reduces floor loading concerns on raised sports flooring systems, while the non‑marking casters protect finished surfaces during repositioning.
Tournament organizers use the net’s consistent height regulation to meet sanctioning body requirements, eliminating the need for frequent re‑measurement between matches.
Quality Assurance and Testing
Each unit undergoes a three‑stage inspection: dimensional verification of frame tolerances (± 2 mm), net tension calibration using a calibrated load cell, and functional cycling of the latch mechanism (≥ 500 cycles).
Material certificates of conformity are supplied for aluminium alloy and polypropylene mesh, traceable to batch numbers. Final packaging includes a QR code linking to the unit’s test report.
Statistical process control monitors critical dimensions, with a target Cpk ≥ 1.33 for post diameter and net height.
Customization Options
Frame length can be adjusted in 0.5 m increments to accommodate non‑standard court widths, with corresponding changes to post spacing and net panel count.
Net mesh density is available in 30 mm or 45 mm hexagonal patterns, affecting ball rebound speed and wind resistance.
Color options for the frame anodize include clear, black, bronze, and custom Pantone matches upon request; net edge tapes can be supplied in contrasting colours for court visibility.
Specification Comparison
| Attribute | Standard Model | Heavy‑Duty Option |
|---|---|---|
| Post Material | 6063‑T5 Al, 2 mm wall | 6061‑T6 Al, 3 mm wall |
| Net Tensile Strength | ≥ 30 MPa | ≥ 45 MPa |
| Maximum Wind Load (deflection ≤ 15 mm) | 15 km/h | 25 km/h |
| Weight (collapsed) | 18 kg | 24 kg |
| Price Range (per unit, wholesale) | $120‑$150 | $180‑$220 |
Frequently Asked Questions
- Can the net height be adjusted for wheelchair pickleball variants?
- What information is required to obtain a quotation for a bulk order?
- How is quality inspected before shipment?
- What packaging methods protect the product during overseas transport?
- What is the typical production lead time for an order of 500 units?
Yes, the tension system includes a secondary adjustment rail allowing height settings from 0.80 m to 0.95 m in 5 mm increments.
Provide desired quantity, frame length, mesh density, color preferences, and delivery destination; optional accessories such as wheel kits or storage totes should be specified.
Each unit receives dimensional verification, tension calibration, and functional latch cycling; a batch test report is enclosed with the packing list.
Units are placed in double‑wall corrugated cartons with interior PE foam corners, then stacked on pallets and secured with stretch film; moisture‑barrier bags are added for humid climates.
Lead time is 4‑6 weeks after receipt of approved artwork and deposit, subject to material availability.
