Custom Travel Volleyball Pickleball Nets Exporter
The nets are engineered for rapid deployment in temporary courts, combining lightweight portability with sufficient tension stability for competitive play. Each unit incorporates a reinforced
Custom Travel Volleyball and Pickleball Nets Exporter
The nets are engineered for rapid deployment in temporary courts, combining lightweight portability with sufficient tension stability for competitive play. Each unit incorporates a reinforced perimeter tape and a grommet system that allows attachment to standard aluminum or fiberglass poles without specialized tools. The design targets a packed volume under 0.02 m³ and a total weight below 2.5 kg for easy transport in standard luggage or equipment bags.
Design and Materials
The primary mesh is constructed from high‑tenacity polyethylene filaments with a nominal diameter of 0.8 mm, delivering a break strength of approximately 3500 N per strand. A UV stabilizer package is blended at 0.5 % by weight to retain tensile performance after 500 hours of simulated solar exposure. The border tape uses polyester webbing coated with a PVC layer, providing abrasion resistance and a tensile modulus of 12 GPa.
- Mesh aperture: 45 mm square, compliant with official volleyball and pickleball net specifications.
- Perimeter tape width: 50 mm, with double‑stitched seams for load distribution.
- Tensioning cords: 3 mm polypropylene, pre‑stretched to 2 % elongation limit.
Customization Options
Clients may specify net height, overall width, and mesh color to match venue branding or regulatory requirements. The perimeter tape can be supplied in alternative widths or with reflective strips for low‑light safety. Pole attachment hardware is offered as interchangeable kits, allowing the same net to fit diameters ranging from 30 mm to 50 mm.
- Height adjustments: 2.24 m (volleyball) or 0.86 m (pickleball) with optional intermediate settings.
- Width range: 6.0 m to 9.0 m in 0.5 m increments.
- Color choices: standard white, high‑visibility yellow, or custom Pantone matches.
- Optional accessories: carry bag with reinforced handles, ground stakes, and quick‑release tension levers.
Applications in Sports Facilities and Travel
Because the net system collapses into a compact roll, it satisfies the needs of schools that host multi‑sport tournaments in gymnasiums with limited storage. Coastal resorts benefit from corrosion‑resistant materials that withstand saline air, enabling permanent installation on portable frames for beach volleyball. Expedition teams use the low‑weight design to set up regulation courts on temporary bases, where logistical weight limits are critical.
The grommet spacing of 150 mm ensures uniform load distribution when the net is tensioned to 150 N, reducing deformation during intense play. This specification translates to a maximum sag of less than 10 mm under a 200 N dynamic load, meeting competitive fairness criteria.
Quality Assurance and Testing
Each production lot undergoes a series of standardized inspections to verify dimensional accuracy, material integrity, and performance under simulated use conditions. Results are recorded against internal tolerances that exceed typical industry benchmarks.
| Test Item | Method | Acceptance Criteria |
|---|---|---|
| Mesh tensile strength | ASTM D2256, single‑strand pull | ≥ 3200 N per strand |
| UV resistance (retained strength) | ISO 4892‑2, 500 h Xenon arc | ≥ 80 % of initial strength |
| Dimensional stability | Measurement of net height after 100 h tension cycling | Variation ≤ 5 mm |
| Abrasion resistance of tape | Martindale tester, 10 000 cycles | No visible fraying or loss of coating |
Packaging and Export Logistics
Nets are rolled onto a reusable PVC core with a diameter of 100 mm, then placed inside a polyethylene sleeve that protects against moisture and UV during transit. The sleeve is sealed with a heat‑seal closure and labeled with batch codes for traceability. A corrugated cardboard outer box, dimensions 350 mm × 250 mm × 150 mm, provides impact resistance for palletized shipments.
Export documentation includes material safety data sheets, origin certificates, and compliance statements for the destination country’s sports equipment regulations. Consolidated loads achieve a volumetric efficiency of approximately 70 % when stacked in standard 20‑foot containers.
Frequently Asked Questions
Can dimensions be customized? Yes, net height, width, and mesh color are adjustable per project specifications; provide exact requirements for a quotation.
What information is required before quotation? Desired net size, quantity, delivery destination, and any special features such as reflective tape or custom branding.
What materials are available? Standard high‑tenacity polyethylene mesh with polyester‑PVC perimeter tape; alternative polypropylene mesh or nylon options are available upon request.
How is quality inspected? Each lot undergoes tensile, UV, dimensional, and abrasion tests as outlined in the quality assurance table.
What packaging methods are available? Standard roll‑in‑sleeve with cardboard box; heavy‑duty wooden crate or reusable hard case can be arranged for high‑volume orders.
How are export shipments protected? Moisture‑barrier sleeve, UV‑stable outer wrapping, and shock‑absorbent corrugated packaging; additional desiccant packs are included for humid climates.
What is the typical production lead time? Four to six weeks after approval of final drawings, depending on order size and customization complexity.
How are samples arranged? Sample units are produced upon receipt of a detailed specification sheet and shipped via express courier at the client’s expense.
Contact for Inquiry
To discuss your specific net requirements, request a quotation, or arrange a sample shipment, please reach out via the contact form.
Send Inquiry
