China Ianoni Pickleball Paddle Wholesale Supplier
Pickleball paddles combine a rigid core with a textured striking surface to control ball speed, spin, and placement. For bulk buyers, consistent dimensional tolerances and material uniformity
Ianoni Pickleball Paddle – Wholesale Supply from China
Pickleball paddles combine a rigid core with a textured striking surface to control ball speed, spin, and placement. For bulk buyers, consistent dimensional tolerances and material uniformity directly affect playability and reduce warranty claims across large inventories.
Key Technical Specifications
| Parameter | Typical Value | Customizable According to Project Requirements |
|---|---|---|
| Overall Length | 400 mm (±2 mm) | ±5 mm adjustments for specialty grips |
| Width (Blade) | 190 mm (±2 mm) | Range 180‑200 mm for youth or power models |
| Weight | 210‑235 g (±5 g) | Weight balancing cores available |
| Core Thickness | 12 mm honeycomb polymer | 8‑16 mm options for different stiffness |
| Surface Material | 7‑k carbon‑fiber weave with polyurethane coating | Graphite, fiberglass, or hybrid finishes |
| Edge Guard | Injection‑molded TPU, 3 mm thickness | Rubber or composite edge profiles |
| Grip Circumference | 102 mm (±1 mm) | Sizes 95 mm‑110 mm with over‑wrap options |
Material Selection and Performance
The core uses a polypropylene honeycomb structure that provides a high strength‑to‑weight ratio while dampening vibration. A 12 mm thickness yields a natural frequency around 150 Hz, reducing arm fatigue during extended play sessions.
The striking surface consists of a 7‑k carbon‑fiber fabric impregnated with a UV‑stable polyurethane resin. This combination delivers a surface roughness (Ra) of approximately 1.8 µm, which enhances ball bite for spin generation without excessive wear on the ball’s felt.
Edge guards are formulated from a thermoplastic polyurethane blend with a Shore A hardness of 85, offering impact absorption up to 30 J while maintaining flexibility to prevent cracking under repeated low‑temperature storage.
Manufacturing Considerations for Bulk Orders
Paddles are produced using compression molding with matched metal dies, ensuring dimensional repeatability within ±0.1 mm across cavities. Each mold undergoes temperature profiling to avoid core resin cure variation, which could alter weight distribution.
Inline statistical process control monitors weight and thickness of every tenth unit. If a batch deviates beyond the control limits (±2 σ), the line stops for die inspection and material feed verification, preventing out‑of‑spec products from reaching the packing stage.
Applications in Sports Facilities and Retail
Clubs and schools benefit from paddles that maintain consistent performance over hundreds of impact cycles, reducing the need for frequent replacement and simplifying inventory management. The lightweight design also lowers shipping costs when palletized for bulk delivery to regional distributors.
Retailers seeking private‑label options can rely on the paddle’s stable dimensions to design uniform packaging inserts, ensuring that the product fits standard shelving units without requiring custom fixtures for each SKU.
Customization Options
- Logo printing via pad‑transfer or sublimation on the paddle face or grip
- Color matching of surface coating using Pantone references
- Grip size adjustment with interchangeable over‑wrap thicknesses
- Weight tuning through core density variation or internal weighting inserts
- Edge guard profile selection (rounded, beveled, or flared)
Quality Control and Testing
Prior to shipment, each paddle undergoes a three‑point bend test to verify flexural rigidity; acceptable deflection under a 5 N load is ≤0.8 mm. This ensures the paddle will not exhibit excessive whipping during high‑speed serves.
Surface durability is assessed using a Taber abraser with a 500‑gram load for 500 cycles; mass loss must remain below 0.02 g to confirm coating adhesion. UV exposure testing (150 h at 60 °C) validates that color shift stays within ΔE < 2 units.
Final inspection includes a visual check for cosmetic defects (bubbles, delamination, misprints) and a functional grip slip test where a 2 N tangential force is applied; slip must be < 3 mm to guarantee player control.
FAQ
Can dimensions be customized for specific market regulations?
Yes, length, width, and thickness can be adjusted within the tolerances noted in the specification table, subject to tooling feasibility and minimum order quantities.
What information is required before a quotation is issued?
Desired paddle weight range, surface finish, grip size, logo artwork files, and target order volume enable us to calculate material usage, tooling costs, and lead time accurately.
Which materials are available for the core and striking surface?
Core options include polypropylene honeycomb, Nomex® honeycomb, and solid polymer foam. Surface materials span carbon‑fiber, graphite, fiberglass, and hybrid composites, each with distinct stiffness and spin characteristics.
How is quality inspected during production?
Inline checks monitor weight and thickness, while final stations perform bend, abrasion, UV, and visual inspections as detailed above. All results are logged and available for customer audit upon request.
What packaging methods are available for export shipments?
Paddles are packed in corrugated cartons with internal dividers, optionally wrapped in polyethylene foam sheets. Palletization follows ISPM‑15 standards, and moisture‑absorbent sachets are included for climate‑controlled transit.
What is the typical production lead time?
Lead times range from 15 to 30 working days after artwork approval and deposit receipt, depending on customization complexity and current factory load.
Get a Quote
To discuss your specific requirements and receive a detailed quotation, please contact our sales team.
