Bulk Two Tone Indoor Outdoor Pickleballs Supplier
Two-tone pickleballs combine contrasting colors on a single sphere to improve visibility under varying lighting conditions. This design aids players in tracking the ball during fast exchanges,
Bulk Two Tone Indoor Outdoor Pickleballs Supplier
Two-tone pickleballs combine contrasting colors on a single sphere to improve visibility under varying lighting conditions. This design aids players in tracking the ball during fast exchanges, reducing misjudgments caused by poor contrast.
Technical Specifications
Standard diameter measures 74 mm (±0.5 mm) in accordance with USA Pickleball Association guidelines. Weight ranges from 22 g to 26 g, influencing flight stability and bounce characteristics.
Hardness, assessed via Shore D scale, typically falls between 60 and 68, providing a balance of durability and responsive feel. Rebound height, tested at 23 °C with a standardized drop, averages 135 cm (±5 cm) from a 200 mm drop height.
Surface texture features a shallow dimple pattern that optimizes aerodynamic drag while maintaining consistent grip on paddle faces.
Material Composition
The core polymer is a polypropylene blend engineered for impact resistance and low creep under repeated loading. Impact modifiers are added to enhance toughness without increasing weight.
UV stabilizers constitute approximately 0.5 % of the formulation, limiting color fading and material degradation when exposed to prolonged sunlight. Pigments are dispersed uniformly to achieve the two-tone appearance, with one hue covering roughly 60 % of the surface and the complementary hue covering the remainder.
All materials comply with REACH and RoHS restrictions, ensuring suitability for indoor facilities and outdoor courts subject to environmental regulations.
Construction Details
Seamless rotomolding creates a uniform wall thickness, eliminating weak points associated with traditional two‑piece welding. Wall thickness averages 2.3 mm, contributing to consistent bounce across the ball’s surface.
Post‑molding annealing relieves internal stresses, reducing the likelihood of deformation after extended play cycles. The process also improves dimensional stability, keeping diameter variation within the specified tolerance.
Performance Characteristics
Temperature testing from –10 °C to 45 °C shows rebound variation within ±3 % of the baseline value, indicating reliable play in both climate‑controlled halls and sun‑exposed courts.
Abrasion resistance, measured by Taber wear index, rates below 150 mg loss after 500 cycles, supporting extended service life before surface roughening affects play.
Acoustic dampening properties reduce impact noise by approximately 4 dB compared with standard single‑tone balls, beneficial in noise‑sensitive indoor environments.
Applications
- Indoor sports complexes where lighting varies between fluorescent and LED installations.
- Outdoor community courts subject to direct sunlight and seasonal temperature swings.
- Educational institutions requiring high‑visibility equipment for beginner and intermediate players.
- Recreational clubs hosting mixed‑skill tournaments that benefit from rapid visual tracking.
Quality Control Philosophy
Each production lot undergoes dimensional sampling using laser micrometers, verifying diameter and sphericity before packaging.
Bounce consistency is assessed via a automated drop tower; balls deviating more than ±4 % from the mean rebound are segregated for rework.
Color uniformity is inspected under standardized D65 lighting, ensuring the two‑tone split remains within the specified hue tolerance (ΔE < 3).
Customization Options
- Alternative color pairings (e.g., neon yellow/gray, orange/white) available upon request.
- Surface logo printing using pad‑transfer techniques, with registration tolerance ±0.2 mm.
- Custom packaging configurations, including bulk cartons of 100 units or retail‑ready sleeves of 3.
- Addition of anti‑microbial additives for facilities requiring heightened hygiene standards.
Packaging and Logistics
Bulk shipments utilize double‑wall corrugated cartons lined with polyethylene film to prevent moisture ingress. Each carton holds 100 balls, stacked in a 10 × 10 grid to minimize movement during transit.
Palletized loads conform to ISO 1496‑1 standards, with a maximum load of 1 000 kg per pallet. Corner protectors and stretch film secure the stack, reducing the risk of shifting.
Lead time for standard two‑tone configurations averages 18‑22 working days, contingent on raw material availability and order volume.
Typical Values
| Parameter | Typical Value | Tolerance / Note |
|---|---|---|
| Diameter | 74 mm | ±0.5 mm |
| Weight | 24 g | 22‑26 g range |
| Rebound Height | 135 cm | ±5 cm at 200 mm drop |
| Hardness (Shore D) | 64 | 60‑68 typical |
| Wall Thickness | 2.3 mm | Uniform across sphere |
Frequently Asked Questions
Can the color ratio be adjusted? Yes, the proportion of each hue can be customized to meet specific visibility requirements, subject to minimum order quantities.
What information is needed for a quotation? Required details include desired quantity, color pairing, any logo or artwork files, packaging preference, and delivery destination.
Are the balls USAPA approved? The balls conform to USAPA dimensional and weight specifications; formal approval can be pursued upon request.
How is batch consistency verified? Each lot undergoes statistical process control checks on diameter, weight, and rebound, with results retained for traceability.
What packaging options exist for export? Standard export packaging includes moisture‑barrier liners, corner‑protected pallets, and ISPM‑15 compliant wooden pallets if required.
