Bulk Graphite Pickleball Paddle Wholesaler
The following details the technical attributes of graphite‑based pickleball paddles offered for wholesale purchase. Information is presented to support informed procurement decisions by engineers,
Bulk Graphite Pickleball Paddle Supply
The following details the technical attributes of graphite‑based pickleball paddles offered for wholesale purchase. Information is presented to support informed procurement decisions by engineers, OEM buyers, and sports‑equipment distributors.
Material Composition and Structure
Graphite paddles typically consist of a carbon‑fiber reinforced polymer face bonded to a honeycomb or foam core. The face layers are impregnated with epoxy resin to achieve a specific flex modulus, while the core material influences overall weight distribution and impact dampening.
Face thickness generally ranges from 0.3 mm to 0.6 mm per layer, with three to five layers common in high‑performance models. Core density can vary between 30 kg/m³ and 80 kg/m³ depending on whether a Nomex honeycomb, polypropylene foam, or polymer‑based core is selected.
Dimensional and Weight Specifications
Standard paddle length falls between 15.5 in and 16.5 in measured from the tip of the handle to the top edge of the face. Width typically ranges from 7.5 in to 8.25 in at the widest point across the face.
Overall weight, including grip and edge guard, usually sits between 7.0 oz and 8.5 oz (198 g‑241 g). Swing weight, a measure of perceived heaviness during play, is often reported in the range of 95 to 115 when measured with a standard swing‑weight scale.
Mechanical Performance Properties
Flexural modulus of the graphite face typically measures between 20 GPa and 35 GPa, providing a balance of responsiveness and control. Impact resistance is evaluated using ASTM F1894‑15 test methods, with most paddles demonstrating a peak force tolerance above 150 N before visible delamination.
Surface roughness, quantified as Ra (average roughness), is generally kept below 0.8 µm to ensure consistent ball spin and reduce wear on the ball’s felt. Thermal expansion coefficient of the composite face is around 2.5 × 10⁻⁶ /°C, minimizing dimensional change under varying court temperatures.
Customization Options
Wholesale buyers can specify variations in grip circumference, typically offered in 4.0 in, 4.25 in, and 4.5 in diameters, with optional over‑wrap thickness adjustments. Edge guard materials include TPU, rubber, or nylon strips, each affecting edge durability and weight distribution.
Face finish options range from matte to gloss UV‑cured coatings, influencing friction coefficient and ball feel. Surface graphics can be applied via sublimation printing, allowing for custom logos or color schemes without altering the underlying composite structure.
Quality Assurance and Testing
Each production lot undergoes dimensional verification using laser scanning to confirm length, width, and thickness tolerances within ±0.5 mm. Weight checks are performed with precision balances calibrated to 0.01 g resolution.
Mechanical sampling includes flexural testing on a three‑point bend fixture and impact testing per ASTM F1894. Visual inspection identifies any resin voids, delamination, or surface imperfections before packaging.
Applications in Sports Equipment Supply Chains
Graphite pickleball paddles serve as the preferred choice for competitive play due to their consistent stiffness-to-weight ratio, which supports precise shot placement and reduced player fatigue. Distributors stocking these paddles cater to clubs, tournament organizers, and retail outlets seeking reliable performance across skill levels.
Because the material resists moisture absorption and exhibits minimal creep under cyclic loading, the paddles maintain performance characteristics over extended indoor and outdoor use, reducing warranty claims and replacement frequency for bulk purchasers.
Typical Specifications
| Parameter | Typical Range | Notes |
|---|---|---|
| Length | 15.5 in – 16.5 in | Measured from handle tip to face top edge |
| Width | 7.5 in – 8.25 in | Maximum face width |
| Weight | 7.0 oz – 8.5 oz | Includes grip and edge guard |
| Flexural Modulus | 20 GPa – 35 GPa | Face laminate property |
| Swing Weight | 95 – 115 (index) | Measured with standard swing‑weight scale |
| Surface Roughness (Ra) | ≤0.8 µm | Affects ball spin consistency |
Frequently Asked Questions
Can dimensions be customized?
Length, width, and thickness can be adjusted within the limits of the molding tooling; specific changes require a new tool quote and lead‑time adjustment.
What information is required before quotation?
Buyers should provide target weight range, preferred core type, grip size, edge guard material, and any required surface graphics or branding details.
How is quality inspected?
Each lot undergoes dimensional laser scanning, weight verification, flexural and impact testing, and visual inspection for defects before packaging.
What packaging methods are available?
Standard packaging includes individual polyethylene bags placed in master cartons with corner protectors; custom inserts or branded sleeves are available upon request.
Contact for Wholesale Inquiry
To receive a detailed quotation, lead‑time estimate, or sample arrangement, please reach out via the contact form linked below. Provide your specifications to enable a precise technical response.
