Best Price Pickleball Paddle Set with Net – Wholesale

This product page details the engineering specifications, material choices, and performance attributes of a wholesale pickleball paddle set that includes a portable net system. The information is intended to help procurement managers, facility operators, and distributors evaluate suitability for bulk purchase based on technical merit rather than promotional language.

Product Overview

The set consists of two paddles, a collapsible net with tensioning mechanism, and a carrying bag. Paddles are designed for recreational to intermediate play, with a focus on weight balance, surface texture, and durability under repeated impact. The net system meets standard court height and width specifications while allowing quick setup and takedown for temporary installations.

Key Technical Specifications

Materials and Construction

Paddle cores are typically polypropylene honeycomb, which provides a high strength‑to‑weight ratio and consistent rebound characteristics. Alternative cores include Nomex aramid honeycomb for increased rigidity or foam for softer feel. The paddle faces are constructed from layered carbon fiber or fiberglass reinforced with a resin matrix, offering surface hardness that resists chipping while maintaining a controlled coefficient of restitution. Edge guards are injected‑molded TPU to protect against impact damage during play.

The net frame uses 25 mm square steel tubing with a powder‑coat finish to resist rust in outdoor environments. The net itself is woven from UV‑stabilized polyethylene tape, providing tensile strength above 30 MPa and resistance to sagging under tension. Tension is maintained by a cam‑lock system that allows adjustment without tools, ensuring the net stays within ±5 mm of regulation height during use.

Performance Characteristics

Weight distribution is balanced to achieve a swing weight of approximately 185 g·cm², facilitating quick wrist action while providing sufficient mass for power shots. The face surface roughness (Ra) is kept between 2‑4 µm to enhance spin generation without causing excessive ball wear. Impact testing shows a peak force tolerance of 2.5 kN before permanent deformation, corresponding to typical rally speeds in recreational play.

Net tension loss over a 2‑hour play session is measured at less than 8 % when using the cam‑lock system, which is within acceptable limits for casual and league play. The frame’s buckling load under lateral force exceeds 1.2 kN, ensuring stability when struck by a ball or player contact.

Applications in Facilities and Retail

Facility operators choose this set for multipurpose courts where quick conversion between tennis, badminton, and pickleball is required. The lightweight net frame (approximately 7.8 kg total) allows staff to deploy and store the system without specialized equipment, reducing labor costs. Retail buyers appreciate the standardized dimensions and consistent performance, which simplifies inventory forecasting and reduces return rates due to mismatched specifications.

Wholesale distributors benefit from the set’s modular packaging: paddles are nested face‑to‑face with protective sleeves, the net frame disassembles into three sections, and all components fit into a single corrugated carton measuring 650 mm × 250 mm × 150 mm. This configuration optimizes pallet utilization, yielding up to 48 cartons per standard pallet.

Customization Options

• Paddle face material: carbon fiber, fiberglass, graphite, or hybrid layup
• Core type: polypropylene honeycomb, Nomex honeycomb, or EVA foam
• Grip size: small (95 mm), medium (102 mm), large (108 mm) with optional overwrap thickness
• Edge guard color: black, white, navy, or custom Pantone
• Net frame finish: standard powder coat, marine‑grade coating, or anodized aluminum alternative
• Bag material: 600D polyester with PVC coating or recycled PET fabric

Quality Control and Testing

Each paddle undergoes dimensional inspection (±0.5 mm tolerance on length and width), weight verification (±2 g), and face flatness measurement using a laser profilometer. Impact resistance is validated by dropping a 0.5 kg steel ball from 1 m height onto the face; acceptable units show no delamination or cracking. Net mesh tensile strength is tested per ASTM D5034, with a minimum break force of 150 N per tape strand. Final assembly includes a functional test of the cam‑lock tension system to ensure lock‑hold under 50 N lateral load.

Packaging and Logistics

Standard export packaging consists of a double‑wall corrugated box with interior foam inserts to prevent paddle face abrasion. The net frame sections are separated by corrugated dividers, and the carry bag is placed on top. Boxes are sealed with pressure‑sensitive tape and labeled with handling instructions (“Keep Dry”, “This Side Up”). For volume shipments, cartons are stacked on ISPM‑15 compliant pallets and stretch‑wrapped to protect against moisture during transit.

Lead Time and Ordering

Production lead time for standard configurations is 20‑25 working days after receipt of a signed purchase order and approved artwork (if custom branding is requested). Lead times for customized core or face materials may extend to 30‑35 working days due to material sourcing. Minimum order quantity for wholesale pricing begins at 50 sets, with price breaks available at 100, 250, and 500 units. Quotations include EXW, FOB, and CIF incoterms upon request.

Frequently Asked Questions

Can paddle dimensions be adjusted for junior players?

Yes, paddle length can be reduced to 350 mm and width to 170 mm upon request, maintaining the same core‑face construction.

What information is required before a quotation is issued?

Required details include desired quantity, paddle face and core selections, grip size, any custom branding artwork, preferred incoterm, and delivery destination.

Which materials are available for the net?

Standard net uses UV‑stabilized polyethylene; optional upgrades include nylon with higher UV resistance or a coated polyester mesh for increased abrasion resistance.

How is product quality inspected before shipment?

Each batch undergoes random sampling according to AQL 1.0 for visual defects, dimensional checks, and impact testing. A final inspection report is available upon request.

What packaging methods are available for export?

Standard options are single‑wall or double‑wall corrugated boxes with foam inserts; heavy‑duty wooden crates are available for high‑value or long‑haul shipments.

How are export shipments protected from moisture?

Cartons are lined with polyethylene moisture barrier film and pallets are stretch‑wrapped; desiccant packets can be added on request.

What is the typical production lead time?

Lead time ranges from 20‑25 working days for standard sets; customized orders may require 30‑35 working days.

How are samples arranged?

Sample sets (typically 2‑4 units) can be shipped via express freight; sample costs are credited against the first production order upon approval.